Operating Voltage Range: 18 to 28.5Vdc
Max. Standby Current: 288μA maximum (conventional zone connected to external supply)
LED Current Red: 2.2μA @ 24Vdc Green: 6.6μA @ 24Vdc Yellow: 8.8μA @ 24Vdc
End of Line Resistor Value: 3.9k
Temperature Range: -20°C to +60°C
Humidity: 5% to 95% relative humidity (non-condensing)
The MI-DCZRM addressable zone monitor module allows a zone of non-addressable devices to communicate with a Morley-IAS protocol analogue addressable system. As a result existing non-addressable zones can be integrated into a Morley-IAS protocol system.
The module monitors a zone of two-wire non-addressable devices. Each MI-DCZRM uses one of 99 available module addresses on a loop. A fault signal will be transmitted to the panel in case of an open circuit or short circuit on the non-addressable zone wiring or when the external fault input is pulled low (can be used for power supply monitoring). A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limitations).
Write Your Question