Main
| Range of product | Modicon X80 |
| Product or component type | Discrete output module |
| Discrete output number | 64 conforming to EN/IEC 61131-2 |
| Discrete output logic | Positive |
| Discrete output voltage | 24 V 19...30 V DC |
| Discrete output current | 0.1 A |
| Output compatibility | Not IEC 61131-2 DC input IEC 61131-2 type 3 DC input |
Complementary
| Current per channel | 0.125 A |
| Maximum current per module | 6.4 A |
| Insulation resistance | > 10 MOhm 500 V DC |
| Maximum power dissipation in W | 6.85 W |
| Response time on output | 1.2 ms |
| Paralleling of outputs | Yes : 3 maximum |
| Typical current consumption | 160 mA at 3.3 V DC |
| MTBF reliability | 159924 H |
| Protection type | Reverse polarity protection External short-circuit protection Overload protection Overvoltage protection |
| Output overload protection | With current limiter With electronic circuit breaker 0.125 A < Id < 0.185 A |
| Output overvoltage protection | With transil diode |
| Output short-circuit protection | With 2 A external fuse |
| Reverse polarity protection | Reverse mounted diode |
| Voltage detection threshold | < 14 V DC preactuator fault > 18 V DC preactuator at state 0 |
| Maximum tungsten load | 1.2 W |
| Switching frequency | 0.5/LI² Hz |
| Maximum overload time | 15 ms |
| Load impedance ohmic | >= 220 Ohm |
| Status LED | 1 LED (green)+32 channels indicator: 1 LED (green)module operating (RUN): 1 LED per channel (green)channel diagnostic: 1 LED (red)module error (ERR): 1 LED (red)module I/O: |
DIG 64Q TRANS SOURCE 0.1A
Write Your Question
